What Size and Type of HVAC Do I Need? »
There are a few easy ways to determine what size and type of HVAC you require.
There are a few easy ways to determine what size and type of HVAC you require.
There are several important decisions you'll have to make amidst any construction project. One of them is how to supply heat and a…
We want your holiday parties to be the talk of the season, so we've rounded up our top tips on how to pull off hosting without a h…
They sound so rude. you call they and it seems like you are bothering them. They customer rep need to learn about best customers services practices
Our Comfortmaker heat pump was about 3 years old when the x-13 motor went bad. The company that installed it had sold out to someone else. They ordered a new motor and installed it. During the visit, the tech said these motors go out all the time, and they had several more to replace. Since it was under warranty, I thought that was it. Then I get a labor bill for $175. I called international comfort to complain, and although Betty was very nice, the senior management told me there was nothing they could do for me. They said to call the installer. I already talked to him. He told me that Int. Comfort got mad with home every time he called, so he stopped dealing with them. My opinion is if you make and sell junk, you owe it to the consumer to make of right. I will never buy anything else from Carrier or International Comfort. I only gave them 2 stars because Betty was so nice. Buyer beware.
I have installed ICP products for some time now. I have has great success with these products. I currently use ComfortMaker I have also used Heil, Bryant and carrier. If there is a problem with an A/C condenser it's is usually due to an inexperienced Tech Or an unqualified tech that made errors during the. install. Maybe no vacuum was pulled, or negligent practices that run rampant in the industry. My only recommendation is spend the extra money and get the 10 year warranty. Entry level products only have 5 year warranty. Do your homework when having a unit installed.License, insurance and Bond are the minimum requirement for a business in my state. Any way great products sounds like install error especially with A/C condenser problems.
Bought a Tempstar A/C unit three years ago which is manufactured by ICP and have spent three years trying to find a replacement filter!!
I am recently purchasing a home with a 1972 HEIL forced air gas furnace. The model number is GU105AEL or GUi05AEL ?I am trying to figure out if it was an original "clamshell" design Heat Exchanger that was of factory high pressure crimped design or if it was originally a welded design Heat Exchanger. Reason being, I want to know if it is good or if someone got in there and rigged it with a wire feed welder. It has very spotty crappy welds on it so I was thinking someone may have hand welded it to fix a crack in it? However, I was also told some were originally spot welded too at one time. Does anyone have product information / technical information on this model furnace? The house was built in 1972. I know the age alone warrants replacement but the Homeowner says, "the furnace is good." I am concerned if there are different metal alloys in the exchanger and the weld and if the welds will break loose after successive expansion and contraction heating cycles? That might be the case if it was "rigged." Does anyone know the correct answer? It doesn't look like a clean factory weld? I can also see small wire feed welder wires hanging in some spots. Is that normal or did someone "Jerry Rig" this heat exchanger? This Heil name brand is now under this manufacturer. No older model product info is available. It must of been of very high quality to last 40 years. Thank You
Painting can be a significant undertaking, whether you're painting just one room or an entire home. While some people like to take on this project themselves, many choose to hire professionals to ensure the task is completed correctly.
Matte paint doesn't have a shiny quality when it dries, which many homeowners prefer for their interior walls. This is the most popular style of paint for homes. It covers up irregularities in the wall well but is also easily blemished.
Matte Enamel Paint
Matte enamel paint has all the positive qualities of matte paint but will last longer and isn't scuffed as easily.
Gloss paint will dry with a shine to it and is the second-most popular choice for interior wall paint. The shiny quality highlights imperfections in a surface, so people tend to stay away from it when painting wood.
Semi-gloss is also shiny but less so than gloss paint. It's more commonly used on trim than on walls.
Satin falls somewhere between gloss and matte in terms of shininess. It will highlight imperfections well, like gloss, but is easy to clean.
Eggshell is also between gloss and matte on the shininess scale, but it won't highlight imperfections quite as much as satin, semi-gloss, or gloss.
Exterior paints have similar choices for finishes as interior paints, but the pros and cons can be different for outdoor use.
Though gloss paint will make imperfections easily seen, it will also hold up to the elements the best. This paint is best suited for areas of a home or building that are frequently used, like door frames.
Semi-gloss paint is similarly long-lasting but isn't as shiny as gloss.
Satin paint is commonly used for siding but will display irregularities underneath if the siding isn't in good shape.
Flat paint is the best choice if painting over siding that has many dents, scrapes, or other imperfections.
If you're repainting a home that has been previously painted with oil-based paint, your best bet is to stick with this option. Water-based paint layered over old oil-based paint will peel easily.
Water-based paint, or latex paint, dries quickly and cleans up easily, making it the preferred paint for a home's exterior. It will also expand when warm and contract when cool, which means it will hold up in all types of weather.
When embarking on a project as big as painting your home, it's important to know ahead of time what kind of quality you can expect from the painters you hire. Don't settle for the first one you find or the cheapest option. Instead, do your homework to be sure that you hire a trustworthy professional who knows how to paint a house well.
The first thing you'll do when hiring a painter is request quotes from three or four in your area. If you reach out to too many, you'll wind up wasting time narrowing down your list; too few and you may not end up with the best quality or right price.
The typical price range for an interior paint job is between $400 and $4,120, with the average falling around $1,670, depending on the scope of the project and paint requests. It will typically cost around $380 to $790 to paint a typical 10-by-12 foot room.
The cost to paint a home's exterior is a little higher: between $730 and $5,600, with an average of $2,624. The typical home of between 500 and 1,500 square feet will generally cost between $1,000 and $3,000, but this will change depending on the number of stories and home location.
If a quote seems high, ask the contractor what is increasing the price point. Perhaps it's something that can be negotiated, or maybe this business is just overpricing their services. On the other hand, be skeptical of any price points that seem unfathomably low. There could be a reason their prices are below the industry norm - perhaps their quality standards are uncommonly low, too.
Once you have quotes, conduct an over-the-phone interview with your prospects. Some important questions to ask your painter include:
1. Do you have insurance?
It's never a good idea to hire a contractor whose business isn't properly insured. Ask both about comprehensive business liability insurance and workers' compensation, and don't be hesitant to ask for proof. If you are unsure of the validity of the insurance, you can also call the insurance company to double-check that it is an active policy.
2. Do you have a warranty?
Not offering a warranty is a red flag, and you may want to be cautious about hiring a company that doesn't provide one. If they have a warranty, ask how long it lasts, and what it covers. Additionally, you'll want to get the warranty in writing should you need to refer to it later.
3. Who, specifically, will be in my house, and can I trust them?
You always have a right to know who will be entering your home. If the person you are speaking with says he or she will not be personally supervising the project, ask who will be, what their role is, and how long they've been with the company.
Also, don't be afraid to ask if the painters are trustworthy people. Unfortunately, there are plenty of cases where a painter has stolen items from a home or caused damage to the house or injury to the homeowner. Subcontractors may not be as skilled as employees, and the contractor you're hiring may not have much experience working with them, making them more of a risk. Additionally, ask if the painters are employees or subcontractors, and what the screening or hiring process is like. If the company conducts background checks, that's a good sign.
4. What kind of training do your employees receive?
If the contractor makes a point to train new hires on safety techniques as well as quality standards on the job, you're probably in good hands.
5. What kind of paint will you use?
The quality of the paint will affect how good the walls look when the project is completed. If your contractor says they plan on using a paint you don't like, feel free to request an alternative.
6. How long have you been in business, and do you have references?
A well-established company will have more experience and likely more references for you to reach out to than a new company that's just getting off the ground. Be sure to ask for references so you can speak to former customers about their experience working with the painter. When speaking to these people, ask about:
7. How much wall prep is included in the price?
For a long-lasting paint job, a clean wall is crucial. Ask how they plan to clean your walls, if at all, before getting started. A high-quality company will thoroughly prepare a wall so that the paint will lay smoothly and last a long time.
8. Are you active in the community and are you involved in any trade organizations?
Community involvement shows the company:
Additionally, being active in trade organizations indicates it is likely up to date on the latest industry best practices and that the company is dedicated to its trade. Also, a Better Bureau Business membership demonstrates the company is stable, confident, and willing to let potential customers check them out before hiring them.
If the company you hire is involved in a trade organization, it shows they take pride in their work, and are dedicated to providing quality service. Some top trade organizations painters might be a part of include:
Painting and Decorating Contractors of America
PDCA connects painters and home decorators through local chapters and councils. The organization also provides webinars, educational videos, and podcasts so members can stay up to date on the latest best practices and news.
American Coatings Association
The ACA doesn't focus on best practices so much as it does on best products. The nonprofit is dedicated to research and development of high-quality paint products as well as sustainability issues.
Finishing Contractors Association
The FCA has members that are painters as well as professionals who focus on flooring, drywall, and other elements to home construction and renovation.
Better Business Bureau
The BBB isn't a painter-specific group but rather an organization that is dedicated to ensuring that consumers can access information about anyone they do business with. The BBB also rates companies based on a Standards of Trust scale, which goes from A+ to F. A company doesn't have to be a member to get a grade, and it's a good idea to check to see how your contractor is scored as well as its membership status.