What to Know About: General Contractors »
Whether your home needs a complete renovation, or a room needs to be repaired, there are some things to know before you hire.
640 E Ryan RdOak Creek, WI 53154
From Business: Welcome to Oak Creek Plumbing! We've been providing Southeastern Wisconsin with plumbing services for more than 35 years. Our experienced technicians are factory …
610 Nathan LnElkhorn, WI 53121
From Business: Our family owned and operated company has been around since 1894. Feel confident in our long history in supplying Southeast Wisconsin with the best roofing produc…
W3199 S Lakeshore DrLake Geneva, WI 53147
From Business: Reed's Construction, L.L.C., in Lake Geneva, WI, has been family owned and operated since 1958. We specialize in quality work of installation and removal of piers…
1133 Bonnie Brae LnLake Geneva, WI 53147
From Business: Stateline Surface Solutions is a Midwest commercial and industrial coatings company with a focus on wall and floor surface coatings and surface preparation. We ha…
Whether your home needs a complete renovation, or a room needs to be repaired, there are some things to know before you hire.
Find out the questions to ask a roofing contractor and what's involved in repairing and replacing your home's roof.
Since solar installations are powered by the sun, they are typically installed on the roof of a home. Below are some facts to cons…
This contractor was hired by us to rebuild our front porch which was starting to fall apart. They spent 2 days on the front porch. The contractor stated that they had to use extra materials and labor to reinforce some of the frame, which they did not contact us about for permission for any extra cost. After looking under the front porch, I can not see all the lumber that the contractor itemized in the billing invoice. After looking close, I noticed that the supports for two beams where not and are not supported at all. The itemized list also stated that all the material was pressure treated however I can see that numerous boards are not. There is also an area where some boards stick out above the adjacent boards and need to be further sanded to create a level area. The description of the job also included two holes at 48 below grade for new post supports that were not done.The second part of this job was for the contractor to demolish the existing stairs from the first floor to the basement and rebuild a finished stair case from the first floor to the basement. The materials used were supposed to be of a finished material ready to be stained. The material that was used was a pine wood that was rough and not ready for stain. The treads on the stairs are not actual treads but are just basic 2x6 pine material. All the treads and risers were nailed down and not with a finish look. Some of the treads are not level and when you walk on them you can feel your foot is on an angle. The reveal on all the skirt boards on the stair case are not the same. One reveal is 1/8th of an inch while the reveal on the other side of the stairs is about 3/4 of an inch. The treads and risers ALL have gaps. In some cases it looks as though the treads were scribed but not cut along the scribe. None of the treads are actual treads with bull nose but instead are only 2x6 materials. You can see gaps between the risers and the skirt boards and these range from 1/8 th of an inch to 1/4 of an inch. In all of the risers and treads they used nails instead of screws which, although not the preferred method to fasten stairs would have been acceptable if they were not all over the treads and risers in places that will be seen on stained material. The landing that separates the first floor from the basement, the cut material has the grain showing to the outside instead of a bull nose for a finished look. This landing has 2x1 material planks instead of a plywood so that a hard wood flooring can be installed as was discussed by us to the contractors after the stairs were completed not to our liking. Also please note that materials that the contractor listed as being used were not used.We tried to talk to the contractor several times through out the process and actually stopped the construction in order to work out the details and make sure that the way we wanted things done were the way things were going to be done. The contractor got an attitude and kept saying stuff like when you caulk that it would look fine or if you buy this material you can cover this part up etc. After several discussions in which it was evident that the contractor was not going to do what we hired them to do, even giving us two options in which we could either take the extra work done on the front stairs (which was not authorized) at no charge and we deal with the stairs as is or he would charge us for the extra work and would finish the basement stairs to our liking, we decided to have them finish the drywall they had started and end the construction. After the contractors left we did some more research on this company and found numerous people that have complaints about them. Even though we did some research on the company by calling references we did not do an extensive background on them. The reviews we have gotten from several people are consistent with what happened to us.
There has perhaps never been a better tool for do-it-yourself home handymen than the internet. With detailed instructions and videos explaining how to perform a number of common maintenance and renovation tasks around a house, an untrained homeowner might be surprised at how much he or she can accomplish with a quick search online. But even with all of this information, there are still many jobs that lie far outside the scope of most DIY enthusiasts. General contractors are there to fill in this gap.
A general contractor specializes in seeing a home remodel or repair project through from start to finish. To do this, the contractor works with the client - whether they are a homeowner or business - to nail down the scope of the work. Then he or she will turn to one or more subcontractors for specific tasks, like equipment operation, design, electrical work or whatever else is needed.
In essence, general contractors could be thought of as middlemen between a homeowner or business owner and any number of specialists. To get their money's worth, many assume they should just "cut out the middleman" and hire specialists directly, but this often proves more difficult in practice. General contractors won't be completing an entire project by themselves, but should have a long list of dependable experts who can work together and accomplish any task. They might also serve as the manager on the site of a construction project, overseeing workers and providing guidance and assistance when needed. For larger projects, though, the contractor might only handle administrative matters and employ a foreman or other professional for on-site supervision.
There are many general contractors who also specialize in certain tasks themselves. There is usually at least one general contractor on hand to organize the construction of an entire home, for example. But general contractors could also help a homeowner add an additional bedroom, build an in-ground pool or complete a major landscaping project. They could also work with a business to add or improve office space, whether that means making more room or converting a commercial building from a nail salon to a restaurant. Basically, if it's a job that involves building or repairing, a general contractor probably knows how to get it done.
No matter what the exact job may be, a contractor will probably need to accomplish several other essential tasks in pursuit of the ultimate goal, which may include:
Every general contractor performing any kind of work on a project must be licensed to do so in their state. The guidelines for the specifics on licensing vary from state to state. Some states might only require registration of contractors, which is different from licensing. Registration typically means that there must be a written record of what work is being performed and by whom, but it does not guarantee professional knowledge. Licensing, on the other hand, involves an examination process to assess professional competence.
Whether your state requires licensing or registration of contractors, there should be a record of most professionals willing to complete certain projects in your area. Check your state or county website for more information. In states that require licensing, every licensed contractor's contact information is available online or from another public source.
Not every project needs to be completed by a licensed or registered contractor. If it's just a minor job that won't take more than a day or two, and will cost less than a few hundred dollars, it's likely not necessary to find a licensed or registered contractor. However, anything bigger or more expensive, or a project involving plumbing or electrical work, needs to be completed by a licensed or registered professional.
General contractors also must be covered by an insurance policy. This should include liability coverage for any property damage that could be inflicted in the course of a job. It should also include a worker's compensation policy in case anyone is injured on the job. Before hiring a contractor for anything, ask for written proof of this insurance to see exactly what is covered.
A number of trade associations for contractors in the U.S. exist. Some of the biggest include:
Most trade associations for general contractors will provide references for anyone looking to hire a contractor for a specific project. They may also provide a number of benefits for their members, including assistance with licensing, training, insurance and business development.
No matter what you need accomplished, you want to choose a contractor who can get the job done right at a reasonable price. Obviously, this is easier said than done, but there are a few steps you can take to ensure you find a trustworthy general contractor.
The first, and perhaps most reliable, way to find a general contractor is to ask friends and family members for a recommendation. If you know anyone who has had major work done on their home, particularly if it's a similar job, ask them who they hired and if they were pleased with the result. You could also ask neighbors about who they've hired if you notice work being done on their house. Many remodeling contractors post signs in front of homes to advertise their services. As a general rule, it's rarely a good idea to hire a contractor who solicits work by going door to door.
If you are considering hiring a contractor without a personal recommendation, ask the contractor for references from past clients, and do as much background research on them as possible. Look for any complaints (or compliments) online to get a better idea of their track record. There are a number of websites specializing in connecting contractors with people or businesses who need work done. These sites may also allow past clients to submit their own reviews of the contractor.
Before hiring a contractor, make sure you are both in agreement on the project's budget. It's normal for most contractors to charge clients a premium not only for the labor expenses and zoning expertise, but for acquiring the materials as well. Be as clear and concise as possible regarding what you'll be purchasing yourself and what you will be paying the contractor to complete. Homeowners may be able to find a better deal on raw materials when they purchase these directly, but they first need to be sure they aren't buying the wrong things.
Don't forget to discuss how the project will be finalized and what will be done about cleanup. Plans for how the work site will be cleaned at the end of each day as well as at the conclusion of work need to be put in writing. An experienced general contractor should make every effort to keep the workspace clean and prevent dirtying or damaging any other area. Even so, talk with the contractor about the daily schedule, the logistics of transporting workers and equipment, and how cleanup will be handled.
As previously mentioned, you need to make sure to follow any state and local regulations regarding construction work, which includes hiring a licensed or registered general contractor. Ask the contractor for proof of their certification before signing anything, as well as their proof of insurance. You should also check your homeowners insurance policy to see if they offer coverage for contracted work. You may want to call your insurance provider and ask for more details on what your plan will and won't cover.
Perhaps the best way to feel safe about a contractor and the work being done is to hire a contractor you trust. This is why relying on personal references from friends and family is so important, and will often provide a great deal of peace of mind. If you aren't able to obtain a reference, work to conduct extensive research on the contractor as well as the work you are hiring them to perform. This should bring everyone's expectations into alignment and result in a safe work environment.
Before any money changes hands, there should be a contract to sign. Make sure the specifics of the work to be done and all costs are listed in the contract, right down to the most precise details. If you forget to have something included in the contract after signing it, there's rarely a chance of recourse.
Once the specifics of the job are nailed down, be sure to discuss the payment schedule with the contractor. This is important because paying too much up front offers the homeowner minimal leverage if the quality of work does not meet expectations or contractual specifications. Try to establish a reasonable pay schedule with the contractor, such as paying 10 percent of the total cost for each 10 percent of the work that is completed. It's a good idea to include this payment plan in the contract as well.
Finally, look into getting a lien release signed before work begins. If there is ever a dispute regarding payment over the course of the project, a contractor or subcontractor could place a payment claim, or lien, on your property. This can trigger a long legal process that may be frustrating. To avoid this, ask the contractor to sign a lien release, which is a legal agreement that states that any payment accepted is final. This can come in handy if a contractor has his or her own payment issues with their subcontractors. Signing a lien release form certifies that any payment made by a client to the contractor is enough to pay for any goods or services rendered. A lien dispute could also be prevented by performing due diligence prior to picking a contractor, as any contractor with good credit and a long track record of satisfied clients should have no trouble paying for materials and labor once all contract conditions have been met.
Once work is underway, it's never a bad idea to check up on the progress of the job, either by staying in touch with the contractor over the phone or visiting the site in person. If you work with a trustworthy professional, it's probably best to keep your distance and allow everyone to stay busy. If you want to keep an eye on things, make sure workers wear the right safety gear and that everything looks to be moving along according to schedule. Finally, once work is finished and you are satisfied, be sure to thank your contractor and tell friends or family members about your experience.