Tips & Advice
What type of equipment is used for sewer cleaning?
The equipment used for sewer cleaning depends on the nature of the clog. A drain snake--also known as an augur--is usually the first line of defense, and is inserted directly into the pipe to clear blockages. For severe blockages, a device with a video camera can be put into the line to provide a view of the pipe's interior so that the cause of the problem can be properly diagnosed. In cases where the pipe has been blocked by grease buildup, a high-pressure water jet--also known as a hydrojet--can be used to clear the drain.
Do sewer cleaners offer same-day service?
Many sewer cleaners offer same-day service, tackling jobs from clearing your main sewer line, to clearing clogs involving your shower drain, kitchen sink, toilet, dishwasher, and washing machine. Keep in mind that off-hour repairs will be more expensive than those done during normal business hours.
Do sewer lines require regular maintenance?
Sewer lines definitely need regular maintenance to function efficiently. They should be snaked or cleaned with a high-pressure water jet at least once every 22 months. Snaking clears out tree roots, which can cause blockages in your sewer lines. High-pressure water jets are used to clear out grease, which can accumulate over time and cause clogs.
Is there a way to prevent tree roots from obstructing sewer lines?
It is possible to prevent tree roots from obstructing sewer lines. Chemicals such as copper sulfate and potassium hydroxide can be used around the sewer line to discourage root intrusion. Metal or wood barriers can also be installed around the sewer lines to keep them free of root damage. When landscaping, it's best to limit the amount of plants or trees placed in close proximity to sewer lines.
How often should sewer lines be cleaned?
It's recommended that sewer lines be cleaned every 18-22 months; following this schedule can help prevent clogs. If you're experiencing problems such as blocked or slow drains, a plumber can diagnose the issue by using a device that captures video of the pipe's interior. Sewer lines are cleaned with an augur or a high-pressure water jet.
How much does it cost to unclog a sewer line?
It can cost anywhere from $200-$400 or more to unclog a sewer line. If a sewer line is clogged, it's best to stop using all water in the home until the problem is addressed, since the clog might cause flooding. Sewer line clogs are typically accessed by removing the toilet or by performing an exterior drain cleaning.
What is hydrojet drain cleaning?
Hydrojet drain cleaning is a method used to clear sewer lines and drains. With hydrojet drain cleaning, a hose is used to direct a pressurized stream of water into the pipe. This works to clear all clogs, removing any hair, grease, minerals, or other debris that may have accumulated within the pipe. This method of drain cleaning is quick, effective, and safe for the environment.
What are the basic plumbing tools for DIY drain cleaning?
The following tools and common household objects can be used to clean drains at home:
- A plunger
- A drain snake
- Baking soda
- Grease-fighting dish soap
Homeowners can mix boiling water with any of the last three products to break up grease and grime.
Are clog removal liquid products environmentally friendly?
The main ingredients in clog removal liquid products are sodium hydroxide and sodium hypochlorite. According to the Agency for Toxic Substances and Disease Registry, both break down into relatively harmless components when it comes into contact with water or soil. However, both substances cause mild irritation to skin and internal tissues.
Also known as a drain auger, a drain snake is a coiled device around ¼-inch thick. To use a drain snake, put the end into the entrance of the drain. Turn the handle to force the snake deeper, using extra pressure to force it through the bend in the pipe. Keep turning until the snake hits the clog, then either pull the snake and remove the obstruction or force it through. Once the snake is out of the drain, run the water on full blast for a few minutes to ensure the obstruction is completely removed.