Saved to Favorites

(602) 291-9459Write a Review

More Info

Environmental Testing for Asbestos, Lead, Mold, Radon and Other Environmental Hazards

General Info
Envirocheck, Inc. is a multi-faceted, fully accredited laboratory and consulting firm offering its services to you worldwide since 1998. We provide a wide range of professional services that are in compliance with Federal and State regulations including the testing for asbestos, microbiological contaminants (mold/bacteria), radon, as well as, project management, project design, environmental site assessments, training programs, and many other services.
Email
Extra Phones

Main Office Line: (602) 441-5658

Fax: (800) 480-3135

Office Line 1: (800) 480-3575

Office Line 2: (800) 863-3307

Services/Products
Envirocheck provides, but is not limited to, the following services:* Allergen Clearance* Allergen Source Identification* Asbestos Clearance Inspections* Asbestos Consulting & Testing* Asbestos Detection* Asbestos Testing* Asbestos, Microbial and Industrial Hygiene* Building Inspections for Lead* Chemical, Gas, Order Detection* Environmental & Ecological Products & Services* Environmental Assessments* Expert Witness/Litigation Support* Indoor Air Quality Assessments* Laboratory Testing & Consulting Services* Lead Detection & Consulting* Lead Poison Investigations* Microbiology Causation Inspections* Mold Testing* Mold Testing & Consulting* Off Site In-House Accredited Laboratory* On-Site Allergy Assessments* Poison Investigations* Project Design Management* Radon Testing* Soot/Smoke Detection* Water Quality Analysis
Brands
Asbestos • Bulk by PLM • (EPA 600/M4-82-020) & (EPA 600/R-93-116) • Bulk Soil by PLM • Bulk by PLM 400 Point Count • (EPA 600/M4-82-020) • Bulk by PLM 1000 Point Count • (EPA 600/R-93-116) • Air by PCM (NIOSH 7400) • Air by PCM (NIOSH 7400) w/ OSHA 8hr TWA Lead (Flame by AA) • Paint Chips (EPA SW-846 7420) • Wipes (EPA SW-846 7420) • Air Cassettes (NIOSH 7082) • Soil (EPA SW-846 7420) • TTLC (Total Threshold Limit Concentration) • (EPA SW-846 7420) • STLC (Soluble Threshold Limit Concentration) • (EPA SW-846 1311; CCR Ch.11, Art.5, App.II) • TCLP (Toxicity Characteristic Leaching Procedure) • (EPA SW-846 1311, 7420) Microbiology (Fungi) • Mold (Non-Viable): Tape lift, Swab, Air Cassette • Mold (Non-Viable): Vacuum Dust, Dust cassette • Mold (Viable): Swab, Bulk or Contact Plates • (ID and Enumeration with Aspergillus, Penicillium, • Cladosporium, and Stachybotrys speciation) • Mold (Viable): Swab, Bulk or Contact Plates • (ID and Enumeration with requested speciation) • Histoplasma capsulatum: Swab, Air or Bulk • (Detection and Enumeration) • Cryptococcus neoformans: Swab, Air or Bulk • (Detection and Enumeration) Microbiology (Bacteria) • Sewage Screen (Qualitative-Half panel): • Swab, Bulk or Water • (Total coliform and E. coli) • Sewage Screen (Quantitative-Half panel): • Swab, Bulk or Water • (Total coliform and E. coli) • Sewage Screen (Qualitative-Full panel): • Swab, Bulk or Water • (Total coliform, E. coli and Enterococcus) • Sewage Screen (Quantitative-Full panel): • Swab, Bulk or Water • (Total coliform, E. coli and Enterococcus) • Total (Aerobic) Plate Count: Swab, Bulk or • Contact Plate • (FDA BAM) • Total (Aerobic) Plate Count w/ Gram Stain up to 5 • types: • Swab, Bulk or Contact Plate • (FDA BAM) • Total (Aerobic) Plate Count plus ID of top 3 types: • Swab, Bulk or Contact Plate • (FDA BAM) • Total (Aerobic) Plate Count plus ID of top 5 types: • Swab, Bulk or Contact Plate • (FDA BAM) • Bacterial Presence ID up to 3 types: • Swab, Bulk or Contact Plate • Microbiology (Bacteria) • Bacterial Presence ID up to 5 types: • Swab, Bulk or Contact Plate • Bacterial Presence Gram Stain only up to 5 types • Endotoxin (LAL Assay) • (USP 85) • Salmonella: Swab or Bulk • (Qualitative-Presence/Absence) (FDA BAM) • MRSA (Methicillin-Resistant Staphylococcus aureus) • Screen: Swab or Bulk • (Semi-quantitative) (CLSI M02) Microbiology (Food & Consumer Products) • Total (Aerobic) Plate Count • (FDA BAM) • Yeast & Mold Count • (FDA BAM) • Yeast & Mold – Surface Contamination Assay • (FDA BAM) • Salmonella • (Qualitative-Presence/Absence) (FDA BAM) • Staphylococcus aureus Count • (AOAC 2001.05) • Antimicrobial Preservative Efficacy Testing – • Cosmetics • (USP 51 & AOAC 998.10) Allergens • Combination Screen: Cat (Fel d 1), Dog (Can f 1), • Cockroach (Bla g 1), and Dust Mite (Der p 1) • Mouse (Mus m 1) • Rat (Rat n 1) • Single Test
Location
Serving The State Of Arizona
Accreditation

Certified Industrial Hygienist

Categories

Reviews

Hi there!
Be the first to review!
What do you rate this business?First-classBetter than mostAbout what I expectedNot the worst...Disappointing
Click to Rate

Details

Phone: (602) 291-9459